[olug] Redhat: /dev/ttyS0 is not serial port 1?

[Ryan O'Rourke]

On Tue, 2003-09-30 at 14:08, Ryan O'Rourke wrote:
> On Tue, 2003-09-30 at 13:49, Scott Evans wrote:
> > When I use minicom to access my Cisco 4000 series
> > router, my settings are as follows for the serial
> > setting
> > 
> > Serial device :  /dev/ttyS0
> > Bps/par/Bits  :  9600 8N1
> > Hardware flow control : no
> > Software flow control : no
> 
> > >    I've tried /dev/ttyS0 and /dev/ttyS1 with minicom
> > > 2.0.0 under RH9.0 
> > > and I am getting nowhere fast - 
> 
> 'cu -l /dev/ttyS0 -t 9600' 

TYPO alert -- should be: cu -l /dev/ttyS1 -s 9600