[olug] Network

[Nate]

my linux/windows box is the one i have 2 nic cards in.  That one is the 
one that i'm trying to use as the gateway
It works with windows ... sorta..... but in linux i dont' have it 
working .  I want to switch between windows and linux and still have it
work the same way.

thanks,
Nate

Trent Melcher wrote:

>Personally I would put 2 network cards in the box you want to load linux on
>and use that one as your gateway, have your windows box off of that.  If you
>do it this way, you might even see an increase in your network performance
>from the internet.  If you want help, let me know.  HAven't used mandrake
>linux, but have done this same setup numerous times with Redhat, for friends
>and family.
>
>
>Trent
>
>-----Original Message-----
>From: olug-admin at olug.org [mailto:olug-admin at olug.org]On Behalf Of Nate
>Sent: Wednesday, January 15, 2003 5:15 PM
>To: olug at olug.org
>Subject: [olug] Network
>
>
>I have a 2 computer network  (486 pakard bell and a DIT machine with an
>amd 300 mhz chip)
>In windows I have the network working but I want to use that linux
>Mandrake side of the AMD machine to
>network too.  I'm using an ethernet card to access the internet through
>a cable modem and also an ethernet
>card with a crossover cable to form the network between the 2 computers.
>Can someone tell me where to find some useful info to do this, or help
>me out in some way?
>I have been looking on the internet for documentation but sifting
>through it seems impossible.
>thanks,
>Nate
>
>_______________________________________________
>OLUG mailing list
>OLUG at olug.org
>http://lists.olug.org/mailman/listinfo/olug
>
>
>_______________________________________________
>OLUG mailing list
>OLUG at olug.org
>http://lists.olug.org/mailman/listinfo/olug
>
>  
>