[olug] Terminal Settings for Catalyst Routers

[Kevin Hinze]

I used to make these Cisco console cables/adapters quite frequently. I
remember buying up all of Radio Shack's DB9 <-> RJ45 adapters. For all
the Cisco pinout fun, check out this page, if you haven't already:

http://www.cisco.com/warp/public/701/14.html



On Fri, May 23, 2008 at 10:04 AM, Dan Clough <dclough at gmail.com> wrote:
> I don't think the pinouts should be different, but then again, it is
> Cisco...
>
> Thanks for the offer, but I'll keep tinkering around and seeing what I can
> dig up.  I might take you up on your offer later.
>
> Dan
>
> -----Original Message-----
> From: olug-bounces at olug.org [mailto:olug-bounces at olug.org] On Behalf Of
> Obi-Wan
> Sent: Friday, May 23, 2008 9:58 AM
> To: olug at OLUG.ORG
> Subject: Re: [olug] Terminal Settings for Catalyst Routers
>
>> On Fri, May 23, 2008 03:31, Dan Clough wrote:
>>> I've got a Cisco Catalyst 4006 (Supervisor II) that doesn't want to play
>>> nice with any terminals I've hooked up to it.
>>
>> Are you using the Cisco "approved" terminal cable?
>
> I just asked our router guy here, and he confirmed that there is a
> special cable used for these.  They come with every router, but I'm
> betting you got yours used.  The new ones are baby blue cables with
> a female DB9 on one end and an RJ45 on the other end.  They use
> standard 9600-8N1 settings.
>
> I've got one of those cables sitting next to me that you can have
> if you want it.  I'm in Lincoln, so you'll either need to arrange
> transportation or pay for shipping.
>
> --
> Ben "Obi-Wan" Hollingsworth                             obiwan at jedi.com
>   The stuff of earth competes for the allegiance I owe only to the
>     Giver of all good things, so if I stand, let me stand on the
>       promise that You will pull me through.  -- Rich Mullins
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> http://lists.olug.org/mailman/listinfo/olug
>
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> http://lists.olug.org/mailman/listinfo/olug
>



-- 
Kevin Hinze
Operations Technician
Global Hardware Operations
Google Inc.
707-342-4369