[olug] CD and DVD Burning Probelms--K3B, Kubuntu 6.06 LTS and Linux Kernel 2.6.15-27-386
Eric P
eric.maillist at gmail.com
Sat Apr 14 03:30:33 UTC 2007
Joe Gulizia wrote:
> Is there a fix?
>
> Googling hasn't given much help that makes sense to
> me.
> Would another distro work better? I've installed
> EasyUbuntu and Automatix with no real success either.
>
> Video Streaming and other things are working fine the
> way I want, so I'd prefer NOT to downgrade to kernel
> 2.4.x
>
> Thanks for any help.
>
> Joe
>
> ---------- LONG ----------------
>
> Here's the error I get:
>
>
>
> System
> -----------------------
> K3b Version: 0.12.17
>
> KDE Version: 3.5.2
> QT Version: 3.3.6
> Kernel: 2.6.15-27-386
> Devices
> -----------------------
> HITACHI DVD-ROM GD-7500 0005 (/dev/hdc, ) at [CD-ROM;
> DVD-ROM] [Error] [None]
>
> PIONEER DVD-RW DVR-109 1.17 (/dev/hdd, ) at /dev
> [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD-R
> DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R
> Sequential; DVD-R Dual Layer Sequential; DVD-R Dual
> Layer Jump; DVD-RW Restricted Overwrite; DVD-RW
> Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM;
> CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R;
> RAW/R16; RAW/R96P; RAW/R96R]
> K3b
> -----------------------
> Size of filesystem calculated: 4671
>
> Used versions
> -----------------------
> cdrecord: 2.1.1a01
>
> cdrecord
> -----------------------
> /usr/bin/X11/cdrecord: Warning: Running on
> Linux-2.6.15-27-386
> /usr/bin/X11/cdrecord: There are unsettled issues with
> Linux-2.5 and newer.
> /usr/bin/X11/cdrecord: If you have unexpected
> problems, please try Linux-2.4 or Solaris.
> scsidev: '/dev/hdd'
> devname: '/dev/hdd'
> scsibus: -2 target: -2 lun: -2
> Warning: Open by 'devname' is unintentional and not
> supported.
> Linux sg driver version: 3.5.27
> Error: Cannot gain SYS_RAWIO capability.Is cdrecord
> installed SUID root?
> : Operation not permitted
> /usr/bin/X11/cdrecord: Warning: using inofficial
> version of libscg (debian-0.8debian2 '@(#)scsitransp.c
> 1.91 04/06/17 Copyright 1988,1995,2000-2004 J.
> Schilling').
> SCSI buffer size: 64512
> /usr/bin/X11/cdrecord: This version of cdrecord does
> not include DVD-R/DVD-RW support code.
> /usr/bin/X11/cdrecord: See
> /usr/share/doc/cdrecord/README.DVD.Debian for details
> on DVD support.
> Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu)
> Copyright (C) 1995-2004 Joerg Schilling
> NOTE: this version of cdrecord is an inofficial
> (modified) release of cdrecord
> and thus may have bugs that are not present in
> the original version.
> Please send bug reports and support requests to
> <cdrtools at packages.debian.org>.
> The original author should not be bothered with
> problems of this version.
> TOC Type: 3 = CD-ROM XA mode 2
> Using libscg version 'debian-0.8debian2'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'PIONEER '
> Identifikation : 'DVD-RW DVR-109 '
> Revision : '1.17'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: 0x0009
> Profile: 0x002B
> Profile: 0x001B
> Profile: 0x001A
> Profile: 0x0016
> Profile: 0x0015
> Profile: 0x0014
> Profile: 0x0013
> Profile: 0x0011
> Profile: 0x0010
> Profile: 0x000A
> Profile: 0x0009 (current)
> Profile: 0x0008
> Using generic SCSI-3/mmc CD-R/CD-RW driver
> (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
> RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1267712 = 1238 KB
> FIFO size : 4194304 = 4096 KB
> Error: Cannot gain SYS_RAWIO capability.Is cdrecord
> installed SUID root?
> : Operation not permitted
> Track 01: data 9 MB
> Total size: 10 MB (01:02.30) = 4673 sectors
> Lout start: 10 MB (01:04/23) = 4673 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category
> (A+) (3)
> ATIP start of lead in: -11634 (97:26/66)
> ATIP start of lead out: 359846 (79:59/71)
> Disk type: Short strategy type (Phthalocyanine or
> similar)
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> Blocks total: 359846 Blocks current: 359846 Blocks
> remaining: 355173
> Starting to write CD/DVD at speed 32 in real TAO mode
> for multi session.
> Last chance to quit, starting real write in 2 seconds.
> 1 seconds.
> 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> BURN-Free is OFF.
> Turning BURN-Free on
> Performing OPC...
> Starting new track at sector: 0
> Track 01: 0 of 9 MB written.
> /usr/bin/X11/cdrecord: Success. write_g1: scsi
> sendcmd: no error
> CDB: 2A 00 00 00 00 00 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 0E D3 00 00 0E 26 09 30 FE 08 01
> 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x08 Qual 0x01 (logical unit communication
> time-out) Fru 0x0
> Sense flags: Blk 248709120 (not valid)
> resid: 63488
> cmd finished after 2.280s timeout 40s
> /usr/bin/X11/cdrecord: A write error occured.
> /usr/bin/X11/cdrecord: Please properly read the error
> message above.
> write track data: error after 0 bytes
> Writing time: 23.370s
> Average write speed 7.8x.
> Fixating...
> /usr/bin/X11/cdrecord: Success. close track/session:
> scsi sendcmd: no error
> CDB: 5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 64 00
> 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x64 Qual 0x00 (illegal mode for this
> track) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.006s timeout 480s
> cmd finished after 0.006s timeout 480s
> /usr/bin/X11/cdrecord: Cannot fixate disk.
> Fixating time: 2.214s
> /usr/bin/X11/cdrecord: fifo had 64 puts and 1 gets.
> /usr/bin/X11/cdrecord: fifo was 0 times empty and 0
> times full, min fill was 100%.
>
> cdrecord command:
> -----------------------
> /usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdd
> speed=32 -tao driveropts=burnfree -eject -multi -xa
> -tsize=4671s -
>
> mkisofs
> -----------------------
> 4671
> INFO: UTF-8 character encoding detected by locale
> settings.
> Assuming UTF-8 encoded filenames on source
> filesystem,
> use -input-charset to override.
> 10.94% done, estimate finish Thu Apr 12 11:39:07 2007
> 21.56% done, estimate finish Thu Apr 12 11:38:40 2007
> 32.18% done, estimate finish Thu Apr 12 11:38:31 2007
> 43.14% done, estimate finish Thu Apr 12 11:38:26 2007
>
> mkisofs command:
> -----------------------
> /usr/bin/X11/mkisofs -gui -graft-points -volid K3b
> data project -volset -appid K3B THE CD KREATOR (C)
> 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher
> -preparer -sysid LINUX -volset-size 1 -volset-seqno 1
> -sort /tmp/kde-joe/k3bYGGxda.tmp -rational-rock
> -hide-list /tmp/kde-joe/k3b8R4Wtb.tmp -joliet
> -hide-joliet-list /tmp/kde-joe/k3brMaGVb.tmp
> -full-iso9660-filenames -iso-level 2 -path-list
> /tmp/kde-joe/k3bGkxCCa.tmp
>
This error sticks out a bit.
"Error: Cannot gain SYS_RAWIO capability.Is cdrecord
installed SUID root?"
As root run:
chmod u+s `which cdrecord`
This sets the sticky bit for cdrecord which might help with the error above. No idea if that'll completely solve the
problem.
Eric Pierce
More information about the OLUG
mailing list