[olug] cisco 1900

[Adam Haeder]

If you want it to act like a hub, you can set up one port to be a 
management port. That port will see all traffic on the network. That's the 
one you plug your sniffer into :-)

-- 
Adam Haeder
Technical Coordinator, AIM Institute
adamh at omaha.org
(402) 345-5025 x115

On Mon, 16 Sep 2002, Brian Roberson wrote:

> Yes and no.....
> 
> The Cisco Catalyst 19xx is a switch, so it does not perform exactly like a "hub"
> 
> However, If what you are wanting to do is simply extend an existing bridged ( hubs ) 
> network, which it sounds like what you are wanting to do, it will work just fine. 
> The only caveat would be that all the ports need to be in the same VLAN, and
> the connection you make to your existing hub is a cross-over cable.
> 
> 
> 
> 
> 
> On Mon, Sep 16, 2002 at 12:08:22PM -0500, roger schmeits wrote:
> > Is it possible to plug a cisco 1900 into a typically hub and have it
> > broadcast like a hub?
> > 
> > 
> > Roger
> > 
> > 
> > 
> > _______________________________________________
> > OLUG mailing list
> > OLUG at olug.org
> > http://lists.olug.org/mailman/listinfo/olug
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> http://lists.olug.org/mailman/listinfo/olug
>