[olug] sound?
Noel Leistad
noel at metc.net
Fri Jun 28 01:12:41 UTC 2013
No HDMI on the myth unit, it's a backend that only records.... Speakers
connected via 3.5mm
Hadn't thought of the -v on aplay, I'll dump the scsconfig ? log
tomorrow when back to work and see how these compare.
Thanks.
output:
aplay -v /usr/share/sounds/KDE_Startup.wav
Playing WAVE '/usr/share/sounds/KDE_Startup.wav' : Signed 16 bit Little
Endian, Rate 22050 Hz, Mono
Plug PCM: Rate conversion PCM (48000, sformat=S16_LE)
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 22050
exact rate : 22050 (22050/1)
msbits : 16
buffer_size : 7526
period_size : 470
period_time : 21333
tstamp_mode : NONE
period_step : 1
avail_min : 470
period_event : 0
start_threshold : 7526
stop_threshold : 7526
silence_threshold: 0
silence_size : 0
boundary : 493223936
Slave: Route conversion PCM (sformat=S16_LE)
Transformation table:
0 <- 0
1 <- 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 16384
period_size : 1024
period_time : 21333
tstamp_mode : NONE
period_step : 1
avail_min : 1024
period_event : 0
start_threshold : 16384
stop_threshold : 16384
silence_threshold: 0
silence_size : 0
boundary : 1073741824
Slave: Direct Stream Mixing PCM
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 16384
period_size : 1024
period_time : 21333
tstamp_mode : NONE
period_step : 1
avail_min : 1024
period_event : 0
start_threshold : 16384
stop_threshold : 16384
silence_threshold: 0
silence_size : 0
boundary : 1073741824
Hardware PCM card 0 'Intel ICH5' device 4 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 16384
period_size : 1024
period_time : 21333
tstamp_mode : ENABLE
period_step : 1
avail_min : 1024
period_event : 0
start_threshold : 1
stop_threshold : 1073741824
silence_threshold: 0
silence_size : 1073741824
boundary : 1073741824
On 6/27/2013 4:47 PM, unfy wrote:
> I'll echo request for no errors from aplay etc ?
>
> Are you attempting to pump audio out HDMI or the 3.5mm jacks ?
>
> -Will
>
>
> On 6/27/2013 3:29 PM, Noel Leistad wrote:
>> Mixer levels all sources at 100%. Works FINE in MythTV, the
>> system-config-soundcard works as well. I don't have pulse installed, but
>> could try. Suppose it'll get no worse...the alternative has been KVM
>> switch to a Windows box for audio. How degrading; and how lazy.
>>
>> Noel
>>
>> On 06/27/2013 03:02 PM, Justin Reiners wrote:
>>> porn is absolutely no fun without sound... I feel your pain :)
>>>
>>> That is strange that it works everywhere else, do you get any errors
>>> when
>>> attempting to play sounds?
>>>
>>> like others have said, I would check mixer levels.
>>>
>>>
>>> On Thu, Jun 27, 2013 at 2:22 PM, Kelly Williams
>>> <kellywilliams81 at gmail.com>wrote:
>>>
>>>> I had the same problem last night when I mint 13 on my Dell D610. It
>>>> worked fine until I added mate desktop to it. Pulse was saying
>>>> there was
>>>> the card and it was getting sound, I could see the meter flashing but
>>>> nothing was coming out of the speakers and I tried using the head
>>>> phones
>>>> and that didn't work either. This is what worked for me try it
>>>> http://unix.stackexchange.com/**questions/44423/getting-sound-**
>>>> working-on-linux-mint-13-mate<http://unix.stackexchange.com/questions/44423/getting-sound-working-on-linux-mint-13-mate>
>>>>
>>>>
>>>>
>>>> On 6/27/2013 12:59 PM, Rob Townley wrote:
>>>>
>>>>> egrep -i 'pulse|audio|sound|rtkit' /etc/group
>>>>>
>>>>> rtkit is the realtime part of pulse, but that group is not needed. i
>>>>> would
>>>>> like to see documentation on what groups to append to default
>>>>> groups for
>>>>> sound and cd burning. But more importantly, for all the groups in
>>>>> /etc/group, what each particular group enables and the security
>>>>> ramifications of each.
>>>>>
>>>>> Permission changes require at least logout/login to become
>>>>> effective ....
>>>>> maybe even a reboot since pulse sets cookies for X. `id username`
>>>>> would
>>>>> show i am a member of a particular group, but forget that it had not
>>>>> really
>>>>> become effective yet.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Jun 27, 2013 at 12:48 PM, Rob Townley <rob.townley at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Try Pulse Audio Player
>>>>>> paplay /usr/share/sounds/pop.wav
>>>>>>
>>>>>> Could it be a permissions problem? System-config* stuff is often
>>>>>> run as
>>>>>> root, is the user a member of the audio group?
>>>>>>
>>>>>>
>>>>>> On Thu, Jun 27, 2013 at 12:37 PM, Dan Linder <dan at linder.org> wrote:
>>>>>>
>>>>>> Any chance it is a speaker or hardware problem?
>>>>>>> Dan
>>>>>>>
>>>>>>> Sent from my iPad
>>>>>>>
>>>>>>> On Jun 27, 2013, at 11:16 AM, Noel Leistad <noel at metc.net> wrote:
>>>>>>>
>>>>>>> It's been so long since I've had to fix a sound issue that I've
>>>>>>>> forgotten how. Could anyone offer suggestions or tell me what I
>>>>>>>> forgot
>>>>>>>> to provide? I'm stumped; the fact that system-config-soundcard is
>>>>>>>> working along w/ MythTV complicates it to the point that Google
>>>>>>>> hasn't
>>>>>>>> been helpful in the first 15 minutes of searching....
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>> noel
>>>>>>>>
>>>>>>>> running CentOS 5.9 32-bit
>>>>>>>>
>>>>>>>> no sound from aplay /usr/share/sounds/* attempts
>>>>>>>> no sound from vlc *.mp3 attempts
>>>>>>>> no sound or sound device from any flash videos (ahhh!! the real
>>>>>>>> problem...., or at least the reason for attempting to fix)
>>>>>>>>
>>>>>>>> system-config-soundcard detects, plays test sound.
>>>>>>>> mythfrontend plays sound from recordings, liveTV
>>>>>>>>
>>>>>>>> aplay -l gives:
>>>>>>>>
>>>>>>>> **** List of PLAYBACK Hardware Devices ****
>>>>>>>> card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
>>>>>>>> Subdevices: 1/1
>>>>>>>> Subdevice #0: subdevice #0
>>>>>>>> card 0: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel
>>>>>>>> ICH5 -
>>>>>>>> IEC958]
>>>>>>>> Subdevices: 0/1
>>>>>>>> Subdevice #0: subdevice #0
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> ##############################**#########################
>>>>>>>> # Noel Leistad, #
>>>>>>>> # noel at metc.net #
>>>>>>>> ##############################**#########################
>>>>>>>>
>>>>>>>>
>>>>>>>> The old complaint that mass culture is designed for
>>>>>>>> eleven-year-olds
>>>>>>>> is of course a shameful canard. The key age has traditionally
>>>>>>>> been
>>>>>>>> more like fourteen.
>>>>>>>> -- Robert Christgau, "Esquire"
>>>>>>>>
>>>>>>>> ______________________________**_________________
>>>>>>>> OLUG mailing list
>>>>>>>> OLUG at olug.org
>>>>>>>> https://lists.olug.org/**mailman/listinfo/olug<https://lists.olug.org/mailman/listinfo/olug>
>>>>>>>>
>>>>>>>>
>>>>>>> ______________________________**_________________
>>>>>>> OLUG mailing list
>>>>>>> OLUG at olug.org
>>>>>>> https://lists.olug.org/**mailman/listinfo/olug<https://lists.olug.org/mailman/listinfo/olug>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> ______________________________**_________________
>>>>> OLUG mailing list
>>>>> OLUG at olug.org
>>>>> https://lists.olug.org/**mailman/listinfo/olug<https://lists.olug.org/mailman/listinfo/olug>
>>>>>
>>>>>
>>>>>
>>>> ______________________________**_________________
>>>> OLUG mailing list
>>>> OLUG at olug.org
>>>> https://lists.olug.org/**mailman/listinfo/olug<https://lists.olug.org/mailman/listinfo/olug>
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> https://lists.olug.org/mailman/listinfo/olug
>
>
More information about the OLUG
mailing list