[olug] Trixbox, Juniper, and IAX2 issues

[Shawn L. Djernes]

Hello,

Are you trying to register this soft phone with the Trixbox setup or to 
the provider?  If both are registering with the provider then you may be 
having a port conflict.  Try changing the outbound port on the soft 
phone.  This should help.

Shawn

home slice wrote:
> Hi all,
>          I have a dev-trixbox at the office and I decided to use the IAX2
> protocol after I couldnt get the SIP trunks to work.
> IAX works much better and I can make calls from internal network to PSTN,
> however, using Zoiper from outside the network, I cant seem to register with
> the PBX on port 4569(Default IAX2 port).
> I'm pretty sure its something funky with the nat on the Juniper
> firewall(SSG5), so far I havnt had any luck getting things ironed out and I
> cant tell what exactly the issue is.
>
> IAX2 trunk to Dallas works well, no connection issues at all, but the same
> port 4569 from a softphone cant authenticate.  I even assigned my laptop a
> static public IP at the datacenter with no joy.  Anyone here using VOIP and
> going through a Juniper with NAT?
>
> I know its something really stupid, just stuck at the moment
>
>
> Thanks,
> Charles
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> https://lists.olug.org/mailman/listinfo/olug
>
>