[olug] unlocked athlon goodness

Jon thechunk at home.com
Sat Aug 25 09:19:21 UTC 2001


I did something to get my temp monitors working.  You need to install device driver uses i2c devices there are some conflicts with hwp dvd playback card and there is a gui program to display temp readouts.  wish I could rember name of temperature chips any way search freshmeat you might turn something up.

-Jon W.

On Fri, Aug 24, 2001 at 12:25:00PM -0400, Hungate Jim wrote:
> That's not bad, I have my Duron 700 running at 100Mhz, it's not stable if I
> up the FSB with KT133 chipset.
> As a side note, I picked up a Thermaltake Dragon Orb 3 yesterday from
> Computers 2 Go in Bellevue for $24.50. It dropped my CPU temp by 11 degrees
> celcius! I was using the "stock" HSF that came with the CPU and I have a
> couple of extra case fans. It was running at 44, now it's running at 33.
> 
> Have you found a good temperature monitoring program?
> I use Mother Board Monitor in Windows, but I haven't found an equivalent
> program for Linux.
> 
> 
> Jim Hungate
> FIC AZ11E
> Duron 700 @ 1000
> Dragon Orb 3
> 256meg PC133
> Voodoo4 4500
> Mandrake 8.0
> 
> The box said "Requires Windows95 or better", so I installed Linux 
> 
>  
> 
> 
> -----Original Message-----
> From: kaygee [mailto:kegaut01 at willy.wsc.edu]
> Sent: Friday, August 24, 2001 11:08 AM
> To: olug at bstc.net
> Subject: [olug] unlocked athlon goodness
> 
> 
> At the meeting last night I asked a question concerning L1 bridges which
> didn't get an answer but from what I've read I think they shipped me an
> unlocked AXIA T-bird.  Which apparently isn't as uncommon as you might
> think.
> 
> Anyway, I said I'd post my O/C results to the list so I will. The FSB
> would do 155Mhz (up from 133Mhz) and the core would do 1460Mhz (up from
> 1200Mhz), but they wouldn't do it together and weren't totally stable
> (some drive read errors).  It has been totally stable at 144Mhz FSB and
> 1440 core (10x multiplier), so that's what I'm running it at right now.
> 
> It hasn't choked yet on 7 hrs of continuous kernel compile loops combined
> with Q3A demo001 loops so I'd say it's pretty stable.
> 
> Bottom line, yes virginia, there is a santa claus, and he delivers via
> FedEx.
> 
> Keith
> ----------
> There's ease of use and then there's ease of usefulness.
> Choose usefulness. Choose Linux.
> 
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> 
> For help contact olug-help at bstc.net - run by ezmlm
> to unsubscribe, send mail to olug-unsubscribe at bstc.net
> or `mail olug-unsubscribe at bstc.net < /dev/null`
> (c)2001 OLUG http://www.olug.org
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> 
> For help contact olug-help at bstc.net - run by ezmlm
> to unsubscribe, send mail to olug-unsubscribe at bstc.net
> or `mail olug-unsubscribe at bstc.net < /dev/null`
> (c)2001 OLUG http://www.olug.org
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

For help contact olug-help at bstc.net - run by ezmlm
to unsubscribe, send mail to olug-unsubscribe at bstc.net
or `mail olug-unsubscribe at bstc.net < /dev/null`
(c)2001 OLUG http://www.olug.org

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_




More information about the OLUG mailing list